Eg hatch, 2.0 liter, 4294r, E85, 560whp/350tq, AEM
Moderators: Andrea, boosted hybrid
19 posts
• Page 2 of 2 • 1, 2
Re: Eg hatch, 2.0 liter, 4294r, E85, 560whp/350tq, AEM
by TurboGSR96 » March 8th, 2009, 10:07 pm
I would almost expect a 38mm gate to creep on a GT42
- TurboGSR96
- Evans Tuning Member
- Posts: 369
- Joined: March 28th, 2006, 8:44 pm
- Location: Newark, DE
Re: Eg hatch, 2.0 liter, 4294r, E85, 560whp/350tq, AEM
by joshuajames » March 9th, 2009, 10:26 am
yea thats why i was going to get a second gate. how well is that single 44mm on that setup?
-
joshuajames - Evans Tuning Member
- Posts: 55
- Joined: March 28th, 2006, 11:10 am
Re: Eg hatch, 2.0 liter, 4294r, E85, 560whp/350tq, AEM
by boosted hybrid » March 9th, 2009, 10:34 am
It still creeps a bit, and the turbo was using a 1.01 a/r housing on it so it will creep less with that due to increased back pressure.
-
boosted hybrid - Tuner
- Posts: 4331
- Joined: December 15th, 2003, 2:18 am
- Location: Easton, Pa
Re: Eg hatch, 2.0 liter, 4294r, E85, 560whp/350tq, AEM
by joshuajames » February 5th, 2010, 4:35 pm
how much sooner would it make full boost with a divided manifold and pro1's?
-
joshuajames - Evans Tuning Member
- Posts: 55
- Joined: March 28th, 2006, 11:10 am
19 posts
• Page 2 of 2 • 1, 2
Who is online
Users browsing this forum: No registered users and 1 guest